Discovered today the source of a very loud tump from the rear of my sport when crashing over potholes. The arb bush has not enough wear to let the bar move up/down or back and forth. It does however have enough wear to let the bar slide in and out causing a very loud thump. I was chasing this thump for weeks with a large pry bar testing all the bushes and found them to be all ok. I even wrapped harmonic dampers in foam to see if it was the cause. I’m sure you guys already know to check this but thought it might be of help.


Last edited by Max100 on Fri Oct 20 2023 9:05am. Edited 2 times in total

The bar has to have some lateral movement as it's a spiral groove that counters the roll torque. So there must be some lateral movement when the bar is operating. 2012 SDV6 - it's missing a couple of cylinders
2008 TDV8 - it was a labour of love and is much missed

I have a small video I took showing how much play but can’t figure out how to post it here

Upload to youtube and post link here, the forum will format it nicely to view inline. Regards etc.,

Wojtek

---
WAS: 2006 RRS Supercharged
IS: 2010 RRS TDV8 HSE

Hopefully this works https://youtube.com/shorts/usZWAOhfPIk?feature=shared

I have new bushes on order and will post the results when fitted.

Last edited by Max100 on Thu Oct 19 2023 7:43pm. Edited 2 times in total

TheWojtek wrote:

Upload to youtube and post link here, the forum will format it nicely to view inline.