Currently in discussion with a local exhaust specialist, about producing some stainless steel decat downpipes for the 3.6 TDV8. I can't find anyone producing an off-the-shelf pair of decat downpipes anywhere, unless anyone's knows better, and can point me in said direction

Prices are yet TBC, and will be a direct replacement, requiring no further modifications. Will have a better idea of price once he has my pipes as a template, jig produced and for test fitting etc. Obviously, the more they manufacture, the cheaper the price will be

This thread is purely to gauge demand

Last edited by Disco_Mikey on Thu Jun 22 2017 9:04pm. Edited 1 time in total

Ooh that's a bit tempting. So just to cover the likely questions that people may have:
Can you confirm there should be no problem with MOT as cats are not compulsory for diesels?
Should there be a small increase in performance owing to less back pressure?
Main improvement would be a more satisfying exhaust note?

Thanks. 2008 MY Java Black TDV8 HSE

Cats should be visibly present for an MOT. Dummy cats will be in place to satisfy this MOT requirement

Don't expect massive gains in performance, but a little less turbo lag and a little more bottom end power are likely

It will be a little noisier, as the cat does act as a silencer. But again, not hugely so

Please keep us posted

Pipes have been dropped off as a template. Won't be this side of Xmas, as they are flat out

Going to tack together a set, I'll pick them up and check fitment before committing to any number of them

Last edited by Disco_Mikey on Thu Jun 22 2017 9:03pm. Edited 1 time in total

I would be interested in a set for the 4.2SC, they can't be that different to the 3.6tdv8 (can they?).

Completely different

Picked these up this morning



Made of 314 Stainless Steel, TIG welded, straight through with cat shell welded in place. Slightly larger bore than standard, but correct size outlet on the slip joint.

Still to test fit, and see if any adjustments are needed, but they fit the jigs made up exactly the same as the standard pipes

Expected cost is £375 + VAT, or £450 inclusive

They look good. Interested to know if they make much difference to performance and sound.

Disco_Mikey wrote:

Picked these up this morning



Made of 314 Stainless Steel, TIG welded, straight through with cat shell welded in place. Slightly larger bore than standard, but correct size outlet on the slip joint.

Still to test fit, and see if any adjustments are needed, but they fit the jigs made up exactly the same as the standard pipes

Expected cost is £375 + VAT, or £450 inclusive

Do we have any update? MOT , performance , smell , etc...I´m interested  TdV8 mapped and egr deleted , 265/60 r18 on Compomotive rims , Navarricos underbody protection , custom rocksliders , Devon44 hidden winch 9500i , IIDTool

Hi, i know this is an old post but i was wondering if anyone can tell me if these downpipes can be removed without too much difficulty? i'm looking for my first RRS and seen a tdv8 i like the look of but it has a blow on one of the downpipes which would need welding / repairing. i have no problem getting it welded IF i can get off off the car, the old guy who will be welding it is brilliant but refuses to weld anything that is still on a car, he is a pipe welder who like to be able to see / move / rotate his work piece which is hard when its on the car . thanks everyone, i hope to be joining the RRS team soon.