I am going to replace the headlight lenses/covers on my 2007 RRS as they have severe UV damage and have internal cracks in the polycarbonate. While I have the headlight assembly apart I thought I wouldn't mind fitting DRLs around each of the lights (basically the same as a D3 headlamp).

Researching I have come across various sized halo rings etc but I would prefer a dedicated kit to fit the lights.

So anyone know of such a kit and can provide a link. Yes I know I can put DRLs into the fog lamps but I dont want to go that route.

Thanks

Garry 07MY RRS TDV6
Arctic Frost
Aspen Interior

Just an option I fitted the kit from Powerful Uk they are combined DRL and fog light .
They dim when headlights come on and cancel when you indicate .
Decent comprehensive kit and all appears well made .
Also a fitting video on their site

Thanks but as indicated in my post I am not interested in that option. 07MY RRS TDV6
Arctic Frost
Aspen Interior

I used THIS set of 4 120mm halo rings with one of THESE relays inside each headlamp to switch off the halo when lights come on



You can see them fitted here behind the new lenses I also fitted

Click image to enlarge

Thanks for that - very helpful and not at all costly. They sell different designs and I like the full ring leds.

Thanks

Garry 07MY RRS TDV6
Arctic Frost
Aspen Interior

No worries, had the rings installed for about 2 years now with no issues TDV8 now with extra grin factor thanks to Alive Tunning: Gone but not forgotten

I fitted these to my old one.
Wired up through fuse box so they came on when car was unlocked
Stayed on during daytime as if factory