Brand new in the box selling due to a change of plans, these are for 05-13 plate sports. Asking £75 including postage but collection would be preferred.

Andy just check the fitting as I think (and I may be wrong ) that those are for the facelifted RRS1, as I’m sure the prefacelifted has to have the solid rails. 2006 2.7 TDV6 HSE in Cairns Blue.

Fair point and I shall check, mine is a facelift but they lined up when I checked them. Thanks for the tip off though.

I believe that the 2010-2013 have the holes already there and the gaps in the
strip are covered by individual covers that sit in the drainage gully,
2005-2009/10 don't have the same holes but it can still me made to fit with a 19mm
hole cutter.


&t=2s

Hope it helps you out with your sale ===========================================
2012 Range Rover Sport Autobiography 3.0 SDV6 8 speed Automatic
Indus Silver with Hockenheim premium two-tone leather Ebony/Lunar,

Hi and thanks again guys, yes Autobiography you are right and i had to do that on my D3 when i fitted roof rails to that. If you have the later one like mine you have the pop out plastic rivets.

Assuming that the fixing points are under the 3 round plastic covers spaced equally along the draining channel on the roof of my 59 plate facelift RRS then, if no one else has already taken them, I'd like to take these off your hands but would require the postage I'm afraid as you're aways away from me.

andyslandy wrote:

Hi and thanks again guys, yes Autobiography you are right and i had to do that on my D3 when i fitted roof rails to that. If you have the later one like mine you have the pop out plastic rivets.

Not sur if this is the proper way to do it but the item is now SOLD, thanks for the interest and regards Andy. [/s][/code]

Col wrote:

andyslandy wrote:

Hi and thanks again guys, yes Autobiography you are right and i had to do that on my D3 when i fitted roof rails to that. If you have the later one like mine you have the pop out plastic rivets.

With genuine L/R rails you still have to increase the size of the hole to 19mm even after removing the plastic blanking plugs on 2010-2013 cars. The ones illustrated for sale do not look like genuine L/R so may be different.



Cheers
Col

Pleased to hear Derek, these plastic poppers cause real grief and i wonder if they melt into place with the sun on them (well so called sun).

It actually looked as though water had got into the screw threads that they protect and surface corrosion on the threading of the hole had bonded to the plastic poppers, whilst the sun on the top cap had weakened it, causing 5 of the 6 to snap off, leaving my drill some work to do!