First of all thank you for all the help so far and I apologise for yet another question... if anyone could help though I'd appreciate it.

Which calipers do I need for the rear conversion? Is it the same as the front ones? Is it the same for the discs?

Also does anyone have the part numbers for the dust covers front and rear?

Thank.you guys.

The RRS has tiny calipers at the rear. And generally they only fitted brembos on the fronts.

Consider if it is worth while fitting to the rears! And no, I would think they would be smaller. (certainly not 6 pots)

Going for the all round conversion. Just need to know the correct parts

I didn't think L/R ever fitted Brembo Calipers to the Rear of the Sport unless they do on the SVR. My 5.0L S/C has the 6 pot on the Front but not Brembos on the Rear.
You may need to go to someone like JE Engineering who do Brembo GT Brake upgrade but it costs around 2.5k for the rears alone.

Cheers
Col

Thanks Col. I'm assuming it has different rear brakes to my SDV6?

Little point in going any bigger at the back because the grip just isn't there.

You will have the same rear calipers as all the rest - there are two sizes of caliper carrier (known as the V8 upgrade in D3 terms) with the larger fitted to all the Brembo/facelift models, so this upgrade may be applicable to you?

Remember, there's not much room at the back because of the EPB drum.  Visiting from DISCO3.CO.UK
2006 Discovery 3 TDV6 Auto HSE Zambezi Silver

Would these fit the rear of my SDV6..

http://www.ebay.co.uk/itm/161723864969?_tr...EBIDX%3AIT

Thank you
Sean