Hi has anyone had problems with front brakes I fitted new britpart discs and EBC pads all was fine for a little while then they started squeaking. I took them out re checked all was fine put them back and they still squeak so now I have fitted brembo pads and guess what they still squeak it's driving me mad someone please help

Apply some copper slip to the rear of the pads and on the ends that go in to the spring clips 👍

Hi I have tried copper slip on both sets of pads. I have changed loads of pads in the past and never had this problem.

Britpart discs

Made in China, for, quite literally, a few pounds each...

You don't say which EBC pads you have, but the ceramic pads to tend to squeak, until they have bedded in fully. A couple of high speed stops should sort that out

Hi mikey

They wasn't ceramic pads but I have now replaced them with brembo pads. I have got a feeling it's wheels off and discs off and replaced again as it can only be the disc now you wouldn't think the disc would cause the squeaking.

When it comes to Britpart (affectionately known as Sh*tpart) anything is possible

Just found a new set of brembo discs for £90.00 the pair so think that will be the best option what do you think

As long as you can be sure they are genuine Brembo discs

Well this is the problem they are from a motor factors on line

£90 sounds a little on the cheap side.

If in doubt, buy from a trusted source: http://www.advancedfactors.co.uk/bd-098877...2533-p.asp

Thanks for the link.

The discs I'm looking at are in a sale the was ment to be £135.00 the pair.