The tip of the plug is snapped and stuck down the inside of the Aux socket behind the drivers arm rest in the rear seated area , anybody know how to get it out or will it be easier just fitting a new socket if they are available ? Java black 2006

Suffering from the same problem myself.

Did you manage to get it sorted? 2014 L405 SDV8 RR Autobiography

2012 RRS SDV6 HSE -Orkney Grey with A/B bodykit - Now Gone
2007 RRS TDV6 HSE - Zermatt Silver - Gone

U had Anyjoy sorting it? I've not attempted mine yet Java black 2006

Kensta wrote:

U had Anyjoy sorting it? I've not attempted mine yet

No not yet.  2014 L405 SDV8 RR Autobiography

2012 RRS SDV6 HSE -Orkney Grey with A/B bodykit - Now Gone
2007 RRS TDV6 HSE - Zermatt Silver - Gone

Does the panel look like this?

If so, you can remove it out (friction fit) by holding the hinged cover and pulling firmly as it it were a recalcitrant drawer.
Unplug the connectors and with better access, you may be able to extract the tip. Dab of superglue on the other end of the broken plug can be a last-ditch action- have done that with snapped keys.

If no joy, it's either around £30 for a new one or get a friend with a soldering iron to swap in a new socket on the board.

This was covered only a few weeks ago...have a look at the solution Mike

2014 Facelift Discovery

mse wrote:

This was covered only a few weeks ago...have a look at the solution

DrLex wrote:

mse wrote:

This was covered only a few weeks ago...have a look at the solution

Here, since Mike CBA to post a link. Magnet was the missing suggestion!

Yes but if i searched for everyone asking i may as well be the search engine  Mike

2014 Facelift Discovery

Thanks DrLex for the post. I will give it a try.  2014 L405 SDV8 RR Autobiography

2012 RRS SDV6 HSE -Orkney Grey with A/B bodykit - Now Gone
2007 RRS TDV6 HSE - Zermatt Silver - Gone