Hi everyone

Does anyone know the torque setting for the flexplate to crank on the 2.7 tdv6 2007.

if i read correctly the torque converter bolts are 45nm , i just cant find the flex/flywheel bolt setting

Thanks for helping

It’ll probably be in the power train section under flex plate under removal and installation. That’s where it is for my 3.0. It’s a torque and degree rotation spec in a specific sequence. 2011 RRS HSE Luxury 3.0 TDV6 Fuji White on Ebony/Ivory
Born and raised in So Cal. Moved to the UK in 2018 for a few years. Now in Poland and looking at moving back to the UK.

Stage 1 - 50nm
Stage 2 - a further 45 degrees
Stage 3 - a further 45 degress

Found this in my downloaded workshop manual that was posted on here some time ago.

Please check if possible to save a faff. 2006 2.7 TDV6 HSE in Cairns Blue.

Have a look at these:

https://www.mediafire.com/folder/bmioajx5v76k7/RR 2006 2.7 TDV6 HSE in Cairns Blue.