RRSPORT.CO.UK • View topic - Tdv8 - Engine system failure


		^ Advertise here ^ RRSPORT.CO.UK
		Forum Gallery Shop Sponsors

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In

Home > Faults & Fixes > Tdv8 - Engine system failure - limp mode

Page 1 of 1

megablade

Member Since: 16 Feb 2012
Location: UK
Posts: 3

Tdv8 - Engine system failure - limp mode

Hi chaps,
Hoping someone can help me please.
2007 RRS TDV8 in limp mode and sounding lumper than normal (not smoking)

Codes read as P132b and P138e

cleared codes and restarted and sounded normal again but threw ! Message(engine system failure) and back to limp mode and lumpy as soon as I pulled away.

Mate has checked actuator arms and in his words they are both free as a bird! (Moving them manually)

Have left turbo replaced 5000 miles ago and mechanic checked right one over and said there wasn't anything wrong with it.

Any thoughts?

Cheers
Barry

Thu Jan 29 2015 7:43pm

RRSTDV8

Member Since: 12 Aug 2011
Location: Northamptonshire
Posts: 9159

2012 Range Rover Sport SDV6 HSE Orkney Grey

Those error codes (they're not complete LR codes as they are missing two numbers at the end) indicate turbo boost issues.

They both refer to the right hand turbo.

You need to get the full LR DTC code read to help pin down the exact issue but I bet it's the actuator that's the problem. 2012 SDV6 - it's missing a couple of cylinders
2008 TDV8 - it was a labour of love and is much missed

Thu Jan 29 2015 9:55pm

Disco_Mikey

Member Since: 08 Apr 2012
Location: Dundee, Scotland
Posts: 4532

2010 Range Rover Sport Supercharged HSE Santorini Black

A split turbo hose will also log turbo codes

Thu Jan 29 2015 10:35pm

RRSTDV8

Member Since: 12 Aug 2011
Location: Northamptonshire
Posts: 9159

Useful to know, thanks

Would be nice for the OP if it's something as simple as a split hose... 2012 SDV6 - it's missing a couple of cylinders
2008 TDV8 - it was a labour of love and is much missed

Thu Jan 29 2015 10:55pm

megablade

Member Since: 16 Feb 2012
Location: UK
Posts: 3

Really hoping so. Mate said he couldn't hear any 'hissing' though.
When last turbo went it went with a pop and luckily switched off in time. This is still running, so if it is turbo, there are different ways that they can fail?

Thu Jan 29 2015 11:01pm

D12TYJ

Member Since: 01 Sep 2014
Location: London
Posts: 183

2012 Range Rover Sport SDV6 HSE Buckingham Blue

Same fault flagged up on my tdv6, and cars gone into limp mode.
Had it read by a snap on scanner, didnt really say much,
So booked it in with a local land rover specialist.
Hope it something as a broken hose or similar and not the turbo.

Sat Jan 31 2015 4:00pm

D12TYJ

Member Since: 01 Sep 2014
Location: London
Posts: 183

Ended up being my alternator, so check that 1st.
Slightest voltage drop will make the car go into limp mode

Thu Feb 12 2015 10:44am

austencameron

Member Since: 11 Apr 2012
Location: Fife
Posts: 41

2008 Range Rover Sport TDV8 HSE Zermatt Silver

actuators on the turbos could be seized, u can access them from underneath, spent time with wd40 and moving the actuator rod up and down.

I had that fault code last year and cured the problem.

Thu Feb 12 2015 1:22pm

megablade

Member Since: 16 Feb 2012
Location: UK
Posts: 3

Actuator arms/joints lubed plus found a split hose. Job done! Thanks.

Mon Jul 06 2015 9:58pm

RRSTDV8

Member Since: 12 Aug 2011
Location: Northamptonshire
Posts: 9159

2012 SDV6 - it's missing a couple of cylinders
2008 TDV8 - it was a labour of love and is much missed

Tue Jul 07 2015 6:51am

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum