Cheers Jeremy 2020 Pangea Green 1st Edition D240 New Defender 110 is here and loving it
2018 Melting Silver Mini Countryman PHEV - soon to be replaced
2015MY Corris Grey SDv6 HSE Dynamic, the best car I have ever owned, totally reliable only a cou0le of rattles in 3 years, now no longer in my care
Also in my garage is a 1996 TDi300 Defender 90 County HT made into a fake CSW

Thanks for looking guys It looks like the correct cover from your pics! Strange!!!

Will pop in at some point

Lookers Park Royal wrote:

We've just tried putting a FL2 cover in a Sport, they are definately different sizes!

It nust be a faulty Sport one, pop in and we will ask service to have a look for you





Jeremy & Matt

No probs! Matt is off tomorrow and Sunday but feel free to pop in anytime and we'll have a look at it for you!

Jeremy

I have the same problem on my 2010 SC.... I too have the Cargo barrier, but I had it in my old one and no issue... in fact took it out and still had the same issue. will have to pop into LPR at somepoint... GONE** RRS 3.0SC Silver fully loaded - 2020 110 loving it
BMW R1200GSA Rallye
GONE** Fiesta ST2 - Mrs Wokka's - AMG35 now
GONE**BMW K1600GTLE Matt Blue
GONE**Disco 4 2014 Firenze Red
GONE**Evoque SD4 Dynamic Coupe
GONE**RRS 5.0 SC
GONE**RRS HSE TDV8
GONE**RRS HSE TDV8 (The Crap one)
GONE**FL Facelift
GONE**FL 1
GONE**D1
GONE**BMW R1200GS Adventure
GONE: Kawasaki ZX10R
GONE: Focus ST2
** Chinook CH47 - 2 x T55 engines 3,750 hp each!! 183mph, 2xM134 Miniguns, 1xM60

Took my cover into LPR today and stuck it in one of there RRS's and it fitted fine. Nothing wrong with the cover so there must be an issue with the lining in the boot!

You should pop in with the car and let Matthew or I have a look as it sounds like it's connected to how you've fitted the dog guard. If it fitted before the fitment and we've established it's the right loadspace cover is correct then it can only be that presumably??

James

Hi James, Saw Matt today and gonna pop in with the car at some point

It's a phenomenon that we're all keen to know the answer to. My guess is the side trims have moved slightly.

See you soon.

James

Yeah, that's what Matt reckons has happened too. Not sure if it fitted properly before the guard as this was the first time I had removed it.
Are you guys about for me to pop in on Saturday? If so what time are you in from?

Interesting, could this be another MY2010 as were the drivers floor mats, small but subtle changes Are the part numbers the same?? GONE** RRS 3.0SC Silver fully loaded - 2020 110 loving it
BMW R1200GSA Rallye
GONE** Fiesta ST2 - Mrs Wokka's - AMG35 now
GONE**BMW K1600GTLE Matt Blue
GONE**Disco 4 2014 Firenze Red
GONE**Evoque SD4 Dynamic Coupe
GONE**RRS 5.0 SC
GONE**RRS HSE TDV8
GONE**RRS HSE TDV8 (The Crap one)
GONE**FL Facelift
GONE**FL 1
GONE**D1
GONE**BMW R1200GS Adventure
GONE: Kawasaki ZX10R
GONE: Focus ST2
** Chinook CH47 - 2 x T55 engines 3,750 hp each!! 183mph, 2xM134 Miniguns, 1xM60

Mines a 2006 and my cover fitted into a 2010 fine

Wokka,

BigDJ's RRS is pre-2010my. The cover came with the car when we supplied it a few mons ago. He's fitted a dog guard and now the cover appears too narrow. He popped in with the cover which fits fine in our cars. I've suggested that we have a look at how he's fitted the dog guard just in case it's pushed the interior trims apart causing ab bigger gap between the two sockets where the cover clips in. It's strange as it was fine when he bought it, so it must be something to do with the dog guard. You know us..... we'll get to the bottom of it!

BigDJ,

We're open from 9am on Saturday however Matthew is not in. Either Jeremy or I can have a look, however you can never tell how busy we will be on a Saturday. So far 10-12 is looking very busy. I would try removing the guard again and seeing if the panels relax back into their original position?

James

Haven't looked at mine but did anyone else with same issue get it sorted?

Same problem here...

http://rrsport.co.uk/forum/post298028.html#298028