Rory the parts should be a small black block and a plug with 2 long lengths of optic hanging out of it?

you can do this without taking the top screen out, il take my dash apart tomorrow and take some good pictures and do a detailed write up, its pretty straight forward

Check this bad boy out

I have lots of photos & wiring scribal (diagram) to do & probably beer.. I will post later... i will ! Range Rover Sport 2009 Stormer edition.

Last edited by Royrw on Mon Dec 22 2014 3:48pm. Edited 1 time in total

Olly-ibiza wrote:

Rory the parts should be a small black block and a plug with 2 long lengths of optic hanging out of it?

you can do this without taking the top screen out, il take my dash apart tomorrow and take some good pictures and do a detailed write up, its pretty straight forward

Rory it's Roy...Lol Range Rover Sport 2009 Stormer edition.

Royrw wrote:

Check this bad boy out

Love it. Well done Roy!  LCFC. Receiver of threatening letters from Overfinch.

NIce job Roy,,,looks superb.  2010 RRS TDV6 3.0 Autobiography - Stornoway Grey
2006 RRS TDV6 2.7 HSE -Java Black
2008 BMW 3 Series 2.l
2006 BMW 5 series 2.l

Cheers Sag & Burns & any one else ! I also done the reversing camera whilst I was doing this.... the one in the reggy light  Range Rover Sport 2009 Stormer edition.

Here is a starter



as I already had the head unit in I had to splice into the harness to have both units connected but did not have another plug so soldered directly on the back of original unit...not my best work but hey it works !

Just in case the colours are wrong ! ignore ,its more the original colours on your harness that requires to be doubled up !
expect ripped hands











 Range Rover Sport 2009 Stormer edition.

Last edited by Royrw on Mon Dec 22 2014 5:48pm. Edited 3 times in total

This gets better, looking great Roy, that rear number plate camera is a bit of a @"@@ to fit 😳, can't wait to see the write ups

 Range Rover Sport 2009 Stormer edition.

Probably not the right place to post but my next project has arrived


 Range Rover Sport 2009 Stormer edition.

Great job Roy

Looks nice how is the colour match on the fascia panel? Does it look out of place without the buttons on the side or do you get used to it?

Cheers

Guy 2006 RRS S/C CONSTANTLY under modification...
1994 RRC 4.2l not LSE sadly gone but not forgotten
LR Defender 300Tdi - affectionately know as "The Black Beast"

Facia panel is a good match ! Guyzer  Range Rover Sport 2009 Stormer edition.

Good stuff looking forward to some more photos.

Cheers

Guy 2006 RRS S/C CONSTANTLY under modification...
1994 RRC 4.2l not LSE sadly gone but not forgotten
LR Defender 300Tdi - affectionately know as "The Black Beast"

Hi Guys

I thought i would wait for Olly's write up to see how he done it & hoped their was nothing else for me to add but after looking at all the photos I have posted & the parts that Olly has mentioned I think anyone wanting to do this project should have enough information.

I am always here for any questions as well

Merry Christmas  Range Rover Sport 2009 Stormer edition.

The pin out for the unit looks great but I'm having trouble seeing what is done with the fibre optic cable😳,durr