Hi All, i understand bluetooth was an optional extra on my year/model. i have had a check and in SDD it does confirm it was a optional i took the back apart and found were its supposed to be but its not there. im happy to buy one but i cannot see any loose cables anywhere to connect it. (only spare connector near it appears to be under the rear seat base)
does anyone know how they are wired in?

Click image to enlarge

There aren't any spare connectors for the factory options one, (which can be quite a few wires on that year)

I got rid of that useless traffic module TMC (which only seemed to work when tuned to classic FM anyway!)

And fitted a facelift / D4 bluetooth module which are much better, and so much easier to fit.

It connects to that orange optical fibre bus, and 2 power wires, earth and the greeny/blue wire found in the loom below it

You can power it off that red wire if you don't want to touch the loom.

You do need a GAP IID to enable it though. (or SdD)

And some way to answer calls e.g red/green steering wheel buttons or a modified touch screen.
Don't know if you can do it on the headunit. Maybe, probably


https://www.disco3.co.uk/gallery/displayim...&pos=0
Pic here when gallery working......

Click image to enlarge

Thank you for that andy, ill possibly do that then (i didn't realize that was the TMC module), i should be able to pickup the steering wheel control off of a freelander 2 wheel (it almost the same car)