Hi All,
I have been having issues with the suspension on my 2010 TdV8.
I had the compressor changed a couple of weeks ago and then the rear right height sensor needed to be replaced.
Since then, if I go above 45mph I get an Amber Light and suspension fault warning me not to exceed 30mph and supsension drops to low and the 4 x 4 info screen shows the wheels all over the place. After I pull over and switch off and back on, it comes back up to normal height and behaves normally unless I go above 45 mph again.
It’s been in the garage all day and they have been calibrating the height test driving and the same thing happening to them any idea what could be causing it, the garage seem baffled?
I did try to book it in to Green Oval but they can’t book it in until 24 Aug so I’ve gone a local garage for the sensor and now this. 2010 HSE TdV8 in Stornoway Grey.
Powerful Roof Rails and Spare Wheel protector

What's the codes say ?

The right rear sensor was replaced last week. 2010 HSE TdV8 in Stornoway Grey.
Powerful Roof Rails and Spare Wheel protector

The right rear sensor was replaced last week.
 2010 HSE TdV8 in Stornoway Grey.
Powerful Roof Rails and Spare Wheel protector

Update:
Turns out it was a bent bracket on the sensor they replaced last week.
I am officially the owner of the mechanics least favourite car as he spent the best part of yesterday working on it.
Picked it up this morning took it for a drive myself and all good, just hoping I saw the camera van in time 🙄 2010 HSE TdV8 in Stornoway Grey.
Powerful Roof Rails and Spare Wheel protector