I have a 2017 L494 SVR which needs new rear pads but after a update on my scan tool it now won't talk to the car 🙈

I have seen online that you can put a Evoque in service mode by holding the EPB and throttle pedal down then turning the ignition off and back on again is this the same for a sport when the handbrake is on the calipers ? As can't find anyone showing it done on a sport. 2017 SVR. SVO Scafell grey Ebony interior
2012 3.0 SDV6 Autobiography santorini black with ebony/cirrus interior. Gone

Link to extract from a L494 Workshop Manual, don't know if it is the same procedure for the SVR though but don't see why not.

https://drive.google.com/file/d/1JYgosQRX-...sp=sharing

Cheers
Col

Last edited by Col on Fri Dec 25 2020 9:24pm. Edited 1 time in total

Cheers Col. rear pads now changed just need to replace the wear sensor as broke it getting it out and now it tells me pads are worn Lol.
Will pick one up and fit it one shops open again. 2017 SVR. SVO Scafell grey Ebony interior
2012 3.0 SDV6 Autobiography santorini black with ebony/cirrus interior. Gone