So what PSI would be recommended for 22” wheels? (508 style) 2016 Yulong White L494 AB/DYN 3.0SDV6

For the second time,,33 fronts & 37-38 rears  Andy.
21 Ford Ranger
Gone but not forgotten
Focus RS Red Edition
2015 RRS AB Fuji.
2014 RRS SC Santorini
2016 VW Amarok
2014 RRS AB Fuji
2012 RRS Red Edition Fuji
2015 Nissan Navara
2012 RRS SE Santorini
2008 RRS White
2007 RRS Santorino

Haha thank you Andy, duno why that posted twice. 2016 Yulong White L494 AB/DYN 3.0SDV6

I’m currently running 34 on the front and 38 on the rear. I’ve tried quite a few different pressures and this so far has been the best for my car so far. I did try as high as 40 on the rear but I found it really harsh and the pressure rose dramatically in line with the temp. 2012 5.0 SC AB
Mods:
TPMS
Genuine LR DRLs
Remote Boot close from key fob
2016 Discovery 4 Mirrors AKA RRS2
2014 L405 Surround Camera retro fit (WIP)
2013 RRS Dual View Screen fit (Complete)
2016 LR4 RSE
2014 LR4 Homelink
2016 FFRR Electrochromatic Wing Mirror Glass

70 plate Focus ST (Current)
1942 VEP Ford GPW Jeep (Willys) (Current)
1943 Whites M16 Halftrack (Current)
16 plate Eurofighter Typhoon, 2 x Eurojet engines with 20,000lbs thrust each. 1380mph

When my RRS was delivered the PSI was at 50 on all corners and it was set to “heavy load” or whatever it’s called. I dropped the pressures and changed the setting to “light load” it made a massive improvement in rose quality. 2020 SVR / R.I.P. 2019 SVR / 2016 D4 Landmark / 2005 D3 HSE