Hi all, I'm having a Active Roll Control warning light whenever I throw my 2008 TDV8 into a sharp left hand turn though I can't say it wouldn't do the same on a right hand turn.
I have an IID tool to check the fault, see attached pic.
Has anybody had this fault, is there any live data I should be monitoring with the IID tool.
also what do the two letters in brackets (AF) after C1119-62 refer to, I'm guessing its HEX.

Hi Richtdv8,

Did you ever get to the bottom of this? I've got the same error code appearing and could use some pointers if you have any.

Cheers


Guy 2006 RRS S/C CONSTANTLY under modification...
1994 RRC 4.2l not LSE sadly gone but not forgotten
LR Defender 300Tdi - affectionately know as "The Black Beast"

Hi, sorry for late reply.
i did not get a definitive answer, though when i took it in for a service at a main dealer the fault did not re appear.
they did tell me that the the ACE fluid level was low and that the ACE pipes were leaking.
i suspect that they did something with the software but don't know what.
I recommend checking your suspension fluid level.