Hi Lads

Strange question but would anyone know the diameter of the Upper and Lower rear Knuckle bushes on the Sport, Haven't got the bushes yet but have been looking at a Push/Pull Sleeve kit and the smallest sleeve is 44mm outside Diameter.

Don't want to buy the kit and then find the smallest Sleeve is too big to Remove /Replace the Bushes.

Cheers Jock

Which kit is it? I bought a kit that has about 20odd sleeves, perfect for many uses.  Bodsys Brake Bible
Software Updates Contact me
RRS Timed Heat/Remote kits - Contact me
BAS Engine Re-maps/ EGR Blank EuIII and EuIV
Clock On The Dash/ SNOTM /3Flash / BT Update /Service Reset/Error Codes read\ Gearbox Reset
See it HERE

Hi Bodsy

Its the kit on VIDAXL it has 27 pieces, the same kit is advertised with a few other places on ebay,I realise it won't be as good as some of the better makes ,but I am not using it a lot so hopefully it will cover my use.

Thanks Jock

This is the kit I bought.

http://www.ebay.co.uk/itm/UNIVERSAL-CAR-HG...Sw~bFWL5RY

As long as the bolt comes out, this is perfect for removing hub knuckle bushes without having to take the hub knuckl off the car.

I also use them for pressing bearings out as the multiple sizes are excellent for that. Bodsys Brake Bible
Software Updates Contact me
RRS Timed Heat/Remote kits - Contact me
BAS Engine Re-maps/ EGR Blank EuIII and EuIV
Clock On The Dash/ SNOTM /3Flash / BT Update /Service Reset/Error Codes read\ Gearbox Reset
See it HERE

Hi Bodsy

Thanks again bud it looks exactly the same as the one I am looking at. The bolts should be okay as I had them out and Copper Greased them for suspension alignment previously.

Thanks again for the help

Jock