just been taking a few pictures to make a sliding drawer for the boot, aim is to have it made and fit ready for the back end of the year for the start of the shooting season

anybody else done this?

I've measured it up, and plan to use the boot liner as a template for the top and bottom piece, have a large, singular fixed width drawer 1m wide, on a pair of slides, which in turn will be sub divided for the gun, cartridges and 'other' pieces!

will keep updated with progress

only downside i see at the moment will be access to spare wheel winch

plan is to have a lift up flap in top lid, which then with drawer fully pulled out, can access as there will be an aperture in the base that is above the winch winder mech, then when the case is fit, ill leave the boot tray exposed 2010 RRS HSE 3.0 tdv6 2010MY
2012 Audi a5 2.0 tdi s-line
2005 Discovery 3 tdv6
2009 audi a4 2.0tdi saloon
2007 Audi a3 1.9tdi sportback
2004 Navara Double Cab
1996 Shogun 3.0 v6
1984 Landrover 90 2.5d

Hi Michael

http://www.transk9.com/index.php/storage

have a look at this for a few pointers

also this on Disco3, for a few more ideas

http://www.disco3.co.uk/forum/topic70675.h...ot+storage

this was my inspiration:


 2010 RRS HSE 3.0 tdv6 2010MY
2012 Audi a5 2.0 tdi s-line
2005 Discovery 3 tdv6
2009 audi a4 2.0tdi saloon
2007 Audi a3 1.9tdi sportback
2004 Navara Double Cab
1996 Shogun 3.0 v6
1984 Landrover 90 2.5d

might as well aim high

just be careful, someone will work out how to steal it without opening the boot, just like the lights

not with one of these sat on the top of it!

 2010 RRS HSE 3.0 tdv6 2010MY
2012 Audi a5 2.0 tdi s-line
2005 Discovery 3 tdv6
2009 audi a4 2.0tdi saloon
2007 Audi a3 1.9tdi sportback
2004 Navara Double Cab
1996 Shogun 3.0 v6
1984 Landrover 90 2.5d