Can any one shed any light on what's required to go from this:



To this:



2010 3.0L RRS - Would the rear bumper definitely fit and are the exhausts just attachments?

Just need

Rear bumper + tow cover
Tailpipes - there are copies out there that are cheaper than OE. There are petrol/diesel variants IIRC so ensure you get correct fitment

Just need

Rear bumper + tow cover
Tailpipes - there are copies out there that are cheaper than OE. There are petrol/diesel variants IIRC so ensure you get correct fitment

Perfect.. As I thought!

you'll also need new parking sensors and wiring loom, your current sensors are too big for the new original ab bumper.

from the piccie youve posted it looks like an aftermarket bumper. not much difference in price compared to the original and i would go for the original all the way...ask Dan @ Duckworths  Recently bought a 2007 RRS HSE TDV6 for a Pimp-My-Ride-Project.
DONE: Meduza front bumper, AB rear bumper, AB tailpipes, calipers repainted, rear upper tailgate upgrade, side steps, AB front grille, AB side vents, rear LED lights, clear side repeaters, integrated daytime running lights, LED headlights.
TO DO: color code sills and pillars.

Since the OP has a 2010 RRS he can just re-use the existing sensors and wiring loom. 2014 L405 SDV8 RR Autobiography

2012 RRS SDV6 HSE -Orkney Grey with A/B bodykit - Now Gone
2007 RRS TDV6 HSE - Zermatt Silver - Gone

Last edited by JasM on Fri Jan 31 2014 3:15pm. Edited 1 time in total

whoops yep missed that thanks JasM Recently bought a 2007 RRS HSE TDV6 for a Pimp-My-Ride-Project.
DONE: Meduza front bumper, AB rear bumper, AB tailpipes, calipers repainted, rear upper tailgate upgrade, side steps, AB front grille, AB side vents, rear LED lights, clear side repeaters, integrated daytime running lights, LED headlights.
TO DO: color code sills and pillars.

Thanks Gents!

Its just the original one I'm after so that's fine!