RRSPORT.CO.UK |
||
Forum Gallery Shop Sponsors |
Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
![]() | Home > General > Bonnet open error |
![]() ![]() |
|
|
simple1 Member Since: 15 Jan 2006 Location: Somerset Posts: 1657 ![]() ![]() ![]() |
Think it's the nearside ( right as you looking towards engine ) that has the switch in it. Make sure you haven't left any tools under the bonnet |
||
![]() |
|
rigsby Member Since: 20 Apr 2012 Location: Portsmouth Posts: 879 ![]() ![]() |
I always have to push down firmly with the palm of my hand in both front corners of the bonnet before it will shut properly, you get a nice reassuring click when its shut down ok otherwise I get the dreaded honk! MY16 AUTOBIOGRAPHY Indus silver with some toys
|
||
![]() |
|
saty Member Since: 17 Aug 2011 Location: Beds Posts: 227 ![]() ![]() ![]() |
Haha defo checked for tools.. I also found the plug on the drivers side bonnet catch, removed the plug and the re plugged it in.
|
||
![]() |
|
saty Member Since: 17 Aug 2011 Location: Beds Posts: 227 ![]() ![]() ![]() |
Hi... After a few attempts I let the bonnet close from a height just in case it was that, seems to be securely shut.... Blasted honks LOL ![]() |
||
![]() |
|
Paddi Member Since: 06 Jul 2012 Location: Hertfordshire Posts: 1563 ![]() ![]() ![]() |
Have a look at this thread: http://rrsport.co.uk/forum/topic20468.html?highlight=hood+switch
|
||
![]() |
|
saty Member Since: 17 Aug 2011 Location: Beds Posts: 227 ![]() ![]() ![]() |
Hi Paddi Actually the switch did have lubrication on it when I checked earlier ![]() Cheers for the heads up and link ![]() |
||
![]() |
|
awd man Member Since: 30 Nov 2010 Location: Malmesbury Posts: 3355 ![]() ![]() |
another emergency trick is to stick a paperclip into the plug, thus completing the circuit. (obviously tape it up to stop any short circuits) RRS gone
|
||
![]() |
|
saty Member Since: 17 Aug 2011 Location: Beds Posts: 227 ![]() ![]() ![]() |
Paper clip has fixed the issue for now.. Must be a dodgy switch, will speak to dan and get a price for a replacement
|
||
![]() |
|
saty Member Since: 17 Aug 2011 Location: Beds Posts: 227 ![]() ![]() ![]() |
Replacement switch arrived, any one changed this before? Is it difficult?
|
||
![]() |
|
Bodsy Site Sponsor Member Since: 03 Feb 2007 Location: Shropshire Posts: 2162 ![]() ![]() |
no, its really easy. You can work out which bits clip where on the one you have as replacement. 10 minutes tops, inclluding opeonong the car/bonnet etc |
||
![]() |
|
saty Member Since: 17 Aug 2011 Location: Beds Posts: 227 ![]() ![]() ![]() |
Cheers.. I will give it a go tomorrow |
||
![]() |
|
![]() ![]() |
|
All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2005-2025 Futuranet Ltd & Martin Lewis
