RRSPORT.CO.UK • View topic - Engine bogged down


		^ Advertise here ^ RRSPORT.CO.UK
		Forum Gallery Shop Sponsors

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In

Home > Technical > Engine bogged down

Page 1 of 1

GnzYza

Member Since: 29 Apr 2010
Location: SW
Posts: 15

Engine bogged down

Hi guys,

I picked my RRS TDV6 a while now, got loads done to it- sorry haven't been active here been busy with my hobby car.

Anyway its lovely and all, but the other day out of nowhere the car would refuse to pick up, its not until it hits 3k that the turbo kicks in. I haven't any warnings come up.

I have to wait till 3k to get power, can you imagine how agonising that is

Does this sound like the infamous EGR or wastegate actuator? I will get any codes read stored but not sure there will be any as no warnings came up.

Thanks in advance- a few pics....

Click image to enlarge

Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated

Sat Apr 23 2011 11:06am

GnzYza

Member Since: 29 Apr 2010
Location: SW
Posts: 15

Only thing is reading through previous topics on loss of power no one mentions delay is till 3k, its either limp mode or delay of a few seconds.

Sat Apr 23 2011 11:13am

scott7

Member Since: 20 Apr 2009
Location: Scotland
Posts: 282

Sounds exactly the same as the problem I had, turned out to be an egr valve.

Sat Apr 23 2011 6:31pm

DSL

Member Since: 17 May 2006
Location: Heelands/Cobham (delete as appropriate)
Posts: 1045

http://www.rrsport.co.uk/forum/topic21918.html

Sat Apr 23 2011 6:51pm

simon1233

Member Since: 06 Jan 2011
Location: Leyland mostly, sometimes Darmstadt
Posts: 421

I had exactly the same symptoms when my EGR valve went

Sat Apr 23 2011 7:31pm

GnzYza

Member Since: 29 Apr 2010
Location: SW
Posts: 15

DSL wrote:
http://www.rrsport.co.uk/forum/topic21918.html

Thanks buddy, done that today totally blocked but no difference to the prob i'm experiencing

Sun Apr 24 2011 12:37am

GnzYza

Member Since: 29 Apr 2010
Location: SW
Posts: 15

Thanks for the reassurance its not something to devastating to my bank account lol.

Another thing i noticed after cleaning the maf to see if that was causing it was, on very slight throttle i'm not hearing a sort of grating sound from the engine but as soon as I give it a tiny more throttle the normal engine tone resumes. Is this EGR?

I'll order the blanking plate.

Sun Apr 24 2011 12:40am

DSL

Member Since: 17 May 2006
Location: Heelands/Cobham (delete as appropriate)
Posts: 1045

What model year? Blanking doesn't work on 07MY and onwards.

Sun Apr 24 2011 7:14am

GnzYza

Member Since: 29 Apr 2010
Location: SW
Posts: 15

Its a 2005 so should be ok. I'll be ordering it once i confirm its the EGR's. Seems straight forward DIY

Mon Apr 25 2011 4:13pm

GnzYza

Member Since: 29 Apr 2010
Location: SW
Posts: 15

Ok well my brother decided to buy two new egr valves while I was at work- wtf £340

Does anyone know of a guide to remove the valve itself, as the blanking guide doesn't cover that. Access seems limited to the mounting bolts.

Thinking to return the valves and buy the blanks anyway, its only going to go again- loads of city commutes

Ps.. have searched no end but couldn't find a guide....must be one covering the valve somewhere?

Thu Apr 28 2011 7:56pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum