RRSPORT.CO.UK • View topic - Rear interior lights


		^ Advertise here ^ RRSPORT.CO.UK
		Forum Gallery Shop Sponsors

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In

Home > Technical > Rear interior lights

Page 1 of 1

dpg123

Member Since: 24 Mar 2016
Location: London
Posts: 56

Rear interior lights

Hi All,

On my 2010 RRS TDV8 (if that is relevant), is it possible to have the rear interior lights (fitted in the headlining) come on when the doors are opened? At present they remain off if I open the doors and only come on if you switch them on individually. The footwell lights come on fine.

Any ideas?

Thanks!

Wed May 11 2016 9:57am

Andy K

Member Since: 18 Sep 2015
Location: GL
Posts: 5138

2005 Range Rover Sport TDV6 HSE Rimini Red

THere is a mod on here.

You run a wire from the boot light and add a diode

Wed May 11 2016 12:05pm

Col

Member Since: 02 Sep 2012
Location: Hawkes Bay NZ
Posts: 5153

2013 Range Rover Sport Supercharged Autobiography Santorini Black

http://www3.telus.net/alansweb/RRS/reardoorlights/

Cheers
Col

Wed May 11 2016 12:24pm

Andy K

Member Since: 18 Sep 2015
Location: GL
Posts: 5138

I seam to recall an easier version than that.

Wed May 11 2016 1:01pm

flydive

Member Since: 17 May 2007
Location: South
Posts: 1213

2008 Range Rover Sport TDV8 HSE Stornoway Grey

http://www.rrsport.co.uk/forum/topic20566.html '08 RRS TDV8
I converted my diesel RRS to run on an environmentally friendly mixture of caribou fat and baby seals oil

Wed May 11 2016 3:22pm

Andy K

Member Since: 18 Sep 2015
Location: GL
Posts: 5138

I did this mod today as I had the headlining loose.

A few pointers from me.

1) For those of you fishing wires from the light to the side of the car/door. Please note this is blocking the curtain airbags. I'm not sure what would win if the airbags went off. The airbag I guess/hope.

Therefore I ran the wire directly backwards to the rear and then followed the factory wiring down.

Click image to enlarge

This is blocking the airbag

2) For swapping the wires at the light connector. The pins can be removed very easily to swap them round.

Remove fuse 1 (top left behind glovebox)
On the connector:-
Unclip plastic at the wire end.
A plastic piece then slides off side ways to expose metal contacts.
Note which wires are in which terminals so you manage to swap them! I think green was in 1. Black in 3.
At the end of the terminal push the metal tab down and pull out.
Remove the other wire.
Lift the metal tab up a tiny bit.
Refit wires reversed.

Click image to enlarge

Sun May 22 2016 8:40pm

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum