Thats why i would not change my 2006 sport for a new one, you cant fit a winch to newer models, have managed to get underbody well protected now except the rock sliders. Cant remember the last time I polished it, its a land rover after all and they are supposed to be dirty. Range Rover Vogue Classic 3.9 V8 1992
101 Forward Control GS 1977
Range Rover Sport SE 4.4 V8 2006

I have a bit of underbody protection for the 2010+ RRS. Fitted to mine are sliders, front bash plate, compressor plate and transmission plate. I suppose freight to your side of the world would be an issue though

Cheers,

Gordon 2015 RRS SDV6 SE, Santorini Black, GOE 2-way HS rods, Traxide dual battery, 275/55R20 Nitto TerraGraplers

2015 Discovery 4 SDV6 HSE - GOE 3-way HS rods, GOE underbody plates and sliders, 275/65R18 Courgia MT

Still trying to find rock sliders, have been think about getting a set for disco 3 and seeing if they can be modified to fit, anyone tried it? Range Rover Vogue Classic 3.9 V8 1992
101 Forward Control GS 1977
Range Rover Sport SE 4.4 V8 2006

there is every chance they may fit as it is the same chassis  If it can be made i will try if not i am up in a wood some where may be over the rain bow
ray@rld-tech.co.uk

That did cross my mind, wheel base is 5.5 inches shorter I think? Range Rover Vogue Classic 3.9 V8 1992
101 Forward Control GS 1977
Range Rover Sport SE 4.4 V8 2006

it is a shame your not near me as i do have some in but no end's welded on and no tubes for them at the moment we could have tried them . If it can be made i will try if not i am up in a wood some where may be over the rain bow
ray@rld-tech.co.uk

Living down here does often cause that problem, been looking at the britpart ones for disco 3, see there are 5 holes for securing to chassis, will take off plastic trim on my sport and see if they are similar.
Surely new holes can be drilled in the rock sliders if they are different, also could modify length to fit? Range Rover Vogue Classic 3.9 V8 1992
101 Forward Control GS 1977
Range Rover Sport SE 4.4 V8 2006

would not think they are any different at all the tubes may be to long but holes should be the same If it can be made i will try if not i am up in a wood some where may be over the rain bow
ray@rld-tech.co.uk

@taff
Did you have a chance to look into this and see if it would be possible with a easy mod to fit the D3's sliders on the RRS?

BR
//Niclas

The RRS's doors wrap round the bottom edge of the cill, the D3's don't. The D3 is also longer so any item will need to be cut and adjusted. Likelihood is that D3 items won't fit the RRS. 2012 SDV6 - it's missing a couple of cylinders
2008 TDV8 - it was a labour of love and is much missed

For a minute there i was getting excited when i see this thread resurrection Wayne  2003 BMW M5 - 5 Litres of V8 Optimax Slurping Goodness in Carbon Black

2013 SDV6 HSE Black Edition- Orkney Grey with Ebony & Ivory. LR Facelift RAI, Genuine G4 Expedition Rack, 4x Warn SBD-160 Spotlights, Warn 9.5XPS Winch, Mantec Underbody Protection and Sump Guard, Full Easy Lift Suspension Module, LR Light Guards, Light Force HTX230 Hybrid spotlights, 18” Compomotive PD1881 on 265/65/18 BF Goodrich KO2, ARB fridge, TuffTrek awning 😎

I have made my own custom set , it is really not so hard if you deal with the right metal worker . Now I have legalized the sliders , winch mount , compotives+oversized tyres , etc...
I have been inspired by OffRoving Rock sliders. TdV8 mapped and egr deleted , 265/60 r18 on Compomotive rims , Navarricos underbody protection , custom rocksliders , Devon44 hidden winch 9500i , IIDTool

Chris, it wasn't me that resurrected it...I got a bit excited when I saw the new post too!  2012 SDV6 - it's missing a couple of cylinders
2008 TDV8 - it was a labour of love and is much missed

rangemogger wrote:

I have made my own custom set , it is really not so hard if you deal with the right metal worker . Now I have legalized the sliders , winch mount , compotives+oversized tyres , etc...
I have been inspired by OffRoving Rock sliders.

Any pics? Always liked the OffRoving sliders  2003 BMW M5 - 5 Litres of V8 Optimax Slurping Goodness in Carbon Black

2013 SDV6 HSE Black Edition- Orkney Grey with Ebony & Ivory. LR Facelift RAI, Genuine G4 Expedition Rack, 4x Warn SBD-160 Spotlights, Warn 9.5XPS Winch, Mantec Underbody Protection and Sump Guard, Full Easy Lift Suspension Module, LR Light Guards, Light Force HTX230 Hybrid spotlights, 18” Compomotive PD1881 on 265/65/18 BF Goodrich KO2, ARB fridge, TuffTrek awning 😎

This is my car , as you can see the clearence lost is minimal  TdV8 mapped and egr deleted , 265/60 r18 on Compomotive rims , Navarricos underbody protection , custom rocksliders , Devon44 hidden winch 9500i , IIDTool