Hi can anyone tell me if the hose
from Fuel burning heater goes
To either the heater matrix hoses
Or to the e g r hoses
On a 2.7 tdv6 r r sport
Thanks in advance for any advice No friends no favours

Didn't we do this last week ?

Matrix

It's my only option after 2 new stats
New radiator new temp sensor
New rad cap
E g r valves bypassed
After replacing engine the only thing I can think
is somehow I must of crossed a coolant pipe
I took photos of everything before I removed
Engine unfortunately for me the photos I took missed
Vital parts so here I am with a 2.7 sport
That won't warm up gets half way there
Then drops on gauge to just over cold
While driving heaters tepid
It's like the stat is permently open
Searched net for hours trying to find a schematic drawing
Of all cooling hoses and heater hoses from f b h
No rave available for 2.7 so I've been told
Like I say only option I can think is have I crossed a hose No friends no favours

Bypassing EGRS won't help

there is a colourful drawing some where.

Will this help...?

Click image to enlarge

Thankyou for replies I bypassed e g r valves thinking coolant
might of being going down exhaust
layout is perfect will now reconnect e g r valves
And check all hoses starting tonight after work
once again thankyou for relies much appreciated No friends no favours