Hi guys

the spray man is doing my plastic door mouldings for £150 to continue the coding exercise but has asked me to ask you guys if anyone had removed the door mouldings? I am sure he is very capable of working it out himself but its always good to hear experience from others in case any snags were found.

also he suggested i buy some spare clips as he expects that a few may snap as the mouldings are removed, so is this a LR only supply?

Cheers as always TDV8 HSE, Remap (+45 BHP + 100 Nm), Taylored sport exhaust system by Pipe Werx
20" HST alloys, Privacy glass, Side steps, Xenon Adaptive Lighting, Adaptive cruise control

From memory, on the rear doors, there is a little grub screw holding the trim in place on the return end of the door when opened unscrew this before attempting to remove trim, then you give the trim a good tug as the rest of the trim is held on with push in clips, its always best to get a few new ones as spares because they sometimes break, i'm guessing the front door trims are similar

i think its a LR only thing for the clips, but they are only a few pence, Dan at Duckworths should be able to sort them

I believe there is a technique in taking them off, Siberianfox had a issue when her trims fell off/came loose as the retainers on the actual trim had been broke when the bodyshop removed them

Yellow and White colour clips part number DYC101420
It's the same clip for the tailgate trim as well.
http://www.lrdirect.com/DYC101420-Trim-Cli...=DYC101420

£0.36 each from
LRDirect
Telephone: 01772 299817
URL: http://www.lrdirect.com

Simple job, however just take your time
One screw in rear door,
Also one screw on the front wing part as well & this part is a slide on job. In Spain - 2018 F Pace - Frightened away from the Sports due to crank failures
Gone - A couple of RRS, A couple of Disco's. However thinking of another Sport.

Last edited by SRE on Tue Mar 06 2012 11:06am. Edited 1 time in total

Thanks guys, i thought it would be simple TDV8 HSE, Remap (+45 BHP + 100 Nm), Taylored sport exhaust system by Pipe Werx
20" HST alloys, Privacy glass, Side steps, Xenon Adaptive Lighting, Adaptive cruise control

cheers SRE, was just looking for your post actually when you replied. Can you remember if theres a screw in the front door as well? TDV8 HSE, Remap (+45 BHP + 100 Nm), Taylored sport exhaust system by Pipe Werx
20" HST alloys, Privacy glass, Side steps, Xenon Adaptive Lighting, Adaptive cruise control

This should give you an idea. The yellow part of the clip SHOULD stay in the door and the white part in the door cladding

Click image to enlarge

dood ??

Do you remember a holding screw in the front doer mate? TDV8 HSE, Remap (+45 BHP + 100 Nm), Taylored sport exhaust system by Pipe Werx
20" HST alloys, Privacy glass, Side steps, Xenon Adaptive Lighting, Adaptive cruise control

My advice

Buy a bag of clips..some will break..  RRS gone
Audi SQ5...Gone Audi Q7 S-Line 240 3.0TDI Gone
Audi A6 Allroad Sport 270 3.0TDI

No screw in the front door, only clips
sorry about the dood, using a phone to post is a pain in the buttocks, still better than your pype wurkx  In Spain - 2018 F Pace - Frightened away from the Sports due to crank failures
Gone - A couple of RRS, A couple of Disco's. However thinking of another Sport.

1 all then by my reckoning  TDV8 HSE, Remap (+45 BHP + 100 Nm), Taylored sport exhaust system by Pipe Werx
20" HST alloys, Privacy glass, Side steps, Xenon Adaptive Lighting, Adaptive cruise control

I make it 2-1 to SRE........how do you spell 'tailored' again sherlock......  ON THE WAY: BMW F21 M140i
MERCEDES GL350 - Metallic Navy Blue w/Grey interior

GOING: BMW F31 335D MSport+ xDrive Touring
GONE: Land Rover Discovery 4 HSE - Stornaway Grey w/Black Interior (wish we'd kept it )
GONE: BMW F10 520D MSport - Carbon Black
GONE:MY12 RRS SDV6 HSE Sumatra/Ivory/Grand Black Privacy glass

This is something I need to do to my RRS... the lower mouldings on the front doors are loose. Have tried giving them a thump and they click into position for a few days but then pop off again.

Looking at that picture... is the front door trim supposed to be fastened with 14 clips in total or 10... can't tell if the 2 holes at each end of the door are supposed to have a yellow clip in them or not? Just want to know so I can buy an appropriate number of replacements. Thanks

Just got a price here in Belfast, its £400 - £500 to get them done, would love them done for £150! Should I shop around more? 

I got all 4 door mouldings and wing mouldings done for £120. I did have a lot of work done ie bumpers etc etc. I would shop around that price you have been quoted is shocking