npinks wrote:

RonnieG wrote:

npinks wrote:

Looks nice Ronnie

I wish I had the know how to paint correction the car for the same finish.

Might just buy a g220 and a scrap panel and play around

With the G220 you can't go too wrong I would work away! just start out with applying LSP and the progress from there

The plan is to get it spotlessly clean and polish with AG SRP or AG EDG, then put on 2 or 3 layers of collinite 476

Would you recommend using a G220 on SRP or EDG to either apply or buff off at my level of expertise? or do it by hand

also is a G220 ok for Collinite 476 apply thin layer by hand (applicator sponge) and then using it to buff off layers?

RonnieG wrote:

I would use the G220 for applying the SRP the only problem with this is it has fillers so you are not going to get true correction and after a short while, the marks will reappear. Personall I don't like the AG products. I would personally go to Tim at Clean your Car and get the sample Menzerma range for £29 and use it start with the lightest cut with a finishing pad then step up if this does not work. I would finish with a couple of coats of Collies by sponge applicator wipe with some megs QD and then sit back and admire!


As My final wax I used Dodo Juice Double with 2 coats of hard wax and 2 coats of soft wax then wiped down with Zaino Za to remove any hazing.

I use 3m compounding and finishing pads (6") and sonus 4" pads. You will use a microfiber fo wipe off the collies then give it a go to get rid of any hazing form excess wax. PM me and I will give u my mob number if u want a chat. Also have a read of some of Dave KG's how to tips they are very good.

cheers for the advice there Ronnie

Got to spend my money on one of two things then i'll get the g220 bought with some sonus 4" & 6" pads and lots of 3m tape

Then give the car a good going over, I'll PM when i get to this point, until i have a g220 i sort of know what i'm doing it hink anyway

Thanks again for the advice

Ronnie - top marks on the detailing

Amazing!!

I would not have the patience for all that flaffing.....as a lazy g1t, I would simply pay someone. , it probably would not look half as good, but hey, 34 hrs is almost a working week  My Gladiators:

RRS S/C HST - respect of the highest order
Freeloader 2 SE with all the toys - my baby RR
Merc SL55 AMG - Tarmac ripper!

Disco3 - Gone
Defender 90 TD - Gone
FFRR Vogue - Gone
BMW X5 4.4 - Gone
LR Defender 300Tdi - Gone
LR Defender 2.5 PETROL - Gone

More like 2 weeks mate RRS TDV6 Gone but still around

SL55 AMG
760Li Alpina
BMW 535D M Sport
BMW 320D Coupe M Sport
Shaguar Hard Type (know you all miss her but she's gone)
And A Van For Rex!

Oh and i love the girlzzzzzzzzzz!!!

 My Gladiators:

RRS S/C HST - respect of the highest order
Freeloader 2 SE with all the toys - my baby RR
Merc SL55 AMG - Tarmac ripper!

Disco3 - Gone
Defender 90 TD - Gone
FFRR Vogue - Gone
BMW X5 4.4 - Gone
LR Defender 300Tdi - Gone
LR Defender 2.5 PETROL - Gone