How about the memory of the seats, mirrors etc.
What I have to do that the car do remember the seat positions etc on each key. That means that I do not have to press each time the 1 or 2 button on the seat when my wife was driving with the RRS.

I read something the each key could remember the positions. But what do I have to press ?

This is all in the manual but from memory:

With the key in the slot and turned to the first position, set your seats/mirrors to the desired position then press M followed by the number of the memory location you wish to use (1, 2 or 3). You get a bong and a message in the binnacle display to confirm. Repeat for each key & position you want to store.

If I remember, you may also need to set lazy entry on - via the "i" menus (press the i on the end of the left hand stalk and cycle through the options).

Job done!  

shmoogle wrote:

If I remember, you may also need to set lazy entry on - via the "i" menus (press the i on the end of the left hand stalk and cycle through the options).

Job done!

Tks. a lot for the info.
the problem was that the "comfort mode" has to be ON for BOTH keys.....
I had it only switched to ON for one key.
Now it works.